The Nano 16 Microwave Motion Sensor offers smart, energy-saving lighting control with high-frequency 5.8 GHz motion detection. It provides a 360° detection range, adjustable up to 16 meters, making it ideal for spaces of all sizes. With customizable sensitivity, time delay, and Lux control settings, the Nano 16 adapts to your environment, ensuring lights activate only when needed. Reliable and easy to install, this sensor can detect motion through doors and walls, perfect for commercial, residential, and public spaces. Upgrade to the Nano 16 for efficient, automated, and intelligent lighting solutions!
220-240V/AC
50Hz
5.8Ghz CW Radar, ISM Band
<0.2mW
Min. 10Sec, Max. 12Min
800W (Incandescent), 300W (LED Load)
360°
1.5-3.5m
3-2000LUX
Approx. 0.9W
0.6-1.5m/s
2-16m (radius), Adjustable
220-240V/AC
50Hz
5.8Ghz CW Radar, ISM Band
<0.2mW
Min. 10Sec, Max. 12Min
800W (Incandescent), 300W (LED Load)
360°
1.5-3.5m
3-2000LUX
Approx. 0.9W
0.6-1.5m/s
2-16m (radius), Adjustable
Microwave sensors have become essential components in modern buildings where safety, efficiency, and automation go hand in hand. Unlike traditional PIR sensors, microwave motion detectors offer broader detection range, superior sensitivity, and the ability to sense through non-metallic materials like glass and drywall—making them ideal for complex layouts and high-traffic zones.
In multi-storey buildings or large facilities, microwave motion sensors provide unmatched performance in automating lighting and enhancing security. These buildings typically have multiple corridors, stairwells, and utility areas that require consistent and responsive lighting control.
High-Rise Residential & Commercial Towers: Smart lighting in common areas improves energy savings and safety.
Hospitals: Automated lighting in patient corridors and back-end service zones supports hygiene and operational efficiency.
Hotels: Seamless lighting experience for guests in hallways, lobbies, and service areas.
Warehouses & Corporate Campuses: Motion detection ensures well-lit zones only when needed, cutting power consumption in unused spaces.
Microwave motion sensor in parking areas detect vehicles and people instantly, activating lights only when needed. Their wide sensor range improves safety, visibility, and energy efficiency.
A microwave motion sensor in staircases ensures lights switch on promptly, reducing fall risks. Their wide detection range works efficiently even in low-light or partially obstructed stairwells.
Microwave sensor applications in corridors offer wide, blind spot-free detection. Unlike PIR, microwave motion detectors sense through walls and glass, ideal for commercial and high-rise interiors.
In fire exits, microwave motion sensors activate lights instantly upon detecting movement, ensuring safe evacuation. Their ability to detect through obstructions makes them vital for emergency response.
Daylight Function
The hold time is set to 30 sec, and the Lux level is set to 300. The light turns on when movement is detected and turns off after people leave, specifically at night. Microwave sensor applications include corridors and staircases.
No Daylight Function
The daylight threshold is set to 2000 lux to disable the light. It turns on when movement is detected, and after people leave, the light turns off once the hold time of 30 seconds has elapsed.
A microwave motion sensor works by emitting high-frequency waves and detecting changes in the reflected signal. When motion occurs within the microwave sensor range, the reflection shifts, triggering a response. Unlike passive sensors, microwave sensors actively scan their surroundings, making them ideal for detecting subtle movement, even through walls or glass, across diverse microwave sensor applications like corridors, parking, stairwells, washrooms, storerooms and offices
| Malfunction | Cause | Remedy |
|---|---|---|
|
The load will not work |
Wrong light control selected Load faulty The mains is switched OFF |
Adjust Setting Change Load Switch ON |
|
The load is always on |
Continuous movement in detection zone |
Check zone setting |
|
The load is ON without any identifiable movement |
The sensor is not mounted for detecting movement reliably. Movement occurred, but was not identified by the sensor (movement
behind the wall, movement of a small object in the immediate lamp vicinity, etc.) |
Securely mount enclosure Check zone setting |
|
The load is ON without any identifiable movement |
Rapid movements are being suppressed to minimize malfunctioning or the detection of
the zone you have set is too small. |
Check zone setting. |
Nano 16 is a compact microwave motion sensor by Sensinova that uses a high-frequency 5.8GHz signal to detect motion. It is designed for automatic lighting control and energy saving, turning lights ON when motion is detected and OFF after a set period.
The detection range of Nano 16 is up to 8 meters (adjustable), depending on the installation height and environment.
yes
Yes, Nano 16 is versatile and can be installed on both walls and ceilings, depending on the application and required detection coverage.
Yes, Nano 16 offers adjustable settings for:
Sensitivity
Time delay
Daylight threshold (lux)
These settings help customize the sensor's performance as per the user's needs.
Nano 16 is ideal for indoor applications such as:
Corridors
Staircases
Parking areas
Offices
Washrooms
Storerooms
Basements
Anywhere automatic lighting is required for safety and energy saving.
© Sensinova India 2025. All rights reserved.