Parking Areas
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
The SN-PR05E Infrared Motion Sensor with Remote and Dimming offers advanced motion detection and lighting control with an infrared sensor and remote functionality. With a 360° detection range and dimming capabilities, it provides precise control over lighting based on motion and ambient light conditions. The sensor allows for adjustable settings, including time delay and Lux sensitivity, which can be customized via the included remote control. Ideal for indoor spaces like offices, conference rooms, and hallways, this sensor enhances energy efficiency by dimming or switching off lights when not needed.The SN-PR05E is easy to install and designed for seamless integration into modern lighting systems, offering both convenience and energy savings.
220-240V/AC
50Hz
<3-2000LUX (adjustable)
Min.10sec±3sec Max.30min±2min Impulse:1s
Max.2000W Min.1000W
5min, 10min, 15min, 30min, 60min, +∞(choice)
360°
50%, 75%, 100% (choice)
6m max(<24℃)
approx 0.5W
2.2-4m
0.6-1.5m/s
10LUX-300LUX
OFF, 10%, 20%,,30% (Choice)
The SN-PR05E Infrared Motion Sensor with Remote and Dimming offers advanced motion detection and lighting control with an infrared sensor and remote functionality. With a 360° detection range and dimming capabilities, it provides precise control over lighting based on motion and ambient light conditions. The sensor allows for adjustable settings, including time delay and Lux sensitivity, which can be customized via the included remote control. Ideal for indoor spaces like offices, conference rooms, and hallways, this sensor enhances energy efficiency by dimming or switching off lights when not needed.The SN-PR05E is easy to install and designed for seamless integration into modern lighting systems, offering both convenience and energy savings.
Power Source |
220-240V/AC |
Daylight sensor |
<3-2000LUX (adjustable) |
Time Delay |
Min. 10Sec, Max. 30Min |
Detection Range |
360° |
Detection Moving Speed |
0.6-1.5m/s |
Automatic Lighting Range |
10LUX-300LUX |
Stand-by Dimming Level |
OFF, 10%, 20%,,30% (Choice) |
Power Frequency |
50Hz |
Stand-by Period |
5min, 10min, 15min, 30min, 60min, +∞(choice) |
Rated Load |
2000W (Incandescent), 1000W (LED Load) |
Install Height |
2.2-4m |
Power Consumption |
Approx. 0.5W |
Detection Distance |
6m max(<24℃) |
Detection Range |
50%, 75%, 100% (choice) |
Adjust the sensor's detection range from 2m to 16m by turning the reach knob. Turn it fully left for minimum range and fully right for maximum. Set based on location needs.
Choose how long the light stays ON (10 seconds to 12 minutes). Movement restarts the timer. Use the shortest time during setup and walk test for accurate adjustment.
Set light sensitivity from 2 to 2000 lux. Fully left = night-only mode (2 lux), fully right = day mode. Turn fully right during testing in daylight, then adjust per requirement.
IRIS S6DR is a surface-mounted PIR presence sensor with dual-load control, designed for automatic operation of lights, exhaust fans or other circuits from a single point. Mounted on ceilings or suitable surfaces, it detects human movement in its field of view and turns connected loads ON when people enter—then switches them OFF after the set delay. Ideal for washrooms, cabins and corridors, it helps maintain comfort and hygiene while cutting energy waste.
Discover the simple yet effective way NANO 16 transforms your space
Emits 5.8GHz microwaves with <0.2mW power, ensuring precise detection.
Detects movement (0.6–1.5m/s) within 360° range, adjustable 2–16m.
Activates lights (≤800W incandescent / 300W LED) with 10s–12min delay.
A microwave motion sensor works by emitting high-frequency waves and detecting changes in the reflected signal. When motion occurs within the microwave sensor range, the reflection shifts, triggering a response. Unlike passive sensors, microwave sensors actively scan their surroundings, making them ideal for detecting subtle movement, even through walls or glass.
Advanced technology meets practical design for superior motion detection
Advanced 5.8 GHz technology for reliable motion detection through walls and doors
Comprehensive coverage for peace of mind
Smart power management reduces consumption
Designed for indoor environments
Adjustable light sensitivity
Delay Time
Detection Range
Install Height
Discover how the IRIS S6DR PIR Presence Sensor automates two loads from one sensor, bringing smart, surface-mounted control to work and utility spaces.
Use IRIS S6DR to independently control lighting and exhaust fans in common or premium washrooms. The sensor brings the light ON as soon as someone enters and can switch the fan ON either together or with its own timing—then turns both OFF automatically after the configured delay, supporting hygiene and comfort.
Automate cabin lighting and a secondary load (such as a task light, signage or ventilation) with a single sensor. IRIS S6DR detects entry and movement, keeps both circuits ON while the space is in use and switches them OFF after the room is vacant, reducing unnecessary burning hours.
Maintain safe circulation while managing two lighting zones or two groups of fixtures. IRIS S6DR can control, for example, main corridor lights and accent or decorative lights, automatically switching them based on movement and configured timing.
Ideal for store rooms, utility rooms, staff wash areas and back-of-house spaces. IRIS S6DR ensures the right combination of lighting and ventilation or other equipment operates only when people are present, cutting down on forgotten switches and wasted power.
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
Experience responsive, dual-circuit lighting and fan control with IRIS S6DR’s PIR sensing, daylight logic and adjustable timing.
In Daylight mode, IRIS S6DR only operates the lighting circuit when both conditions are met: motion is detected and the ambient light level is below the set lux threshold. This prevents lights from turning ON in spaces that are already bright—while still allowing the fan or second load to be controlled as per configuration, if required.
When there is enough natural light, the sensor keeps the lighting circuit OFF even if motion is detected, avoiding unnecessary use of artificial light.
When the ambient light falls below the selected level and IRIS S6DR detects movement, it switches the lighting load ON automatically. The second load (for example, an exhaust fan) can be configured to follow its own timing.
Once motion stops, the loads stay ON for the chosen hold time(s) and then turn OFF automatically, ready for the next occupancy cycle.
In No Daylight mode, IRIS S6DR ignores ambient light and works purely on presence detection. This is ideal for enclosed washrooms, internal cabins and corridors where lights and fans should always respond to occupancy, regardless of time of day.
As soon as a person enters the detection area, the PIR sensor responds to body heat and switches the connected load(s) ON to full operation.
As long as movement is detected within the field of view, IRIS S6DR keeps the loads ON, ensuring continuous comfort and safety during use.
After the last detected movement and once the configured hold time expires for each load, the sensor turns them OFF automatically to save energy.
IRIS S6DR includes an adjustable daylight (lux) threshold so you can decide at what brightness level the lighting circuit should respond. This ensures lights are used only when natural light is no longer sufficient, while still allowing flexible control of the second load.
With two separately controlled outputs, IRIS S6DR can manage a light and an exhaust fan—or two different lighting circuits—from a single sensor. This simplifies wiring and gives you smarter, scene-like behaviour without extra controllers
Every new movement resets the internal timer, keeping both configured loads ON while the area is occupied. This prevents unwanted switch-offs during active use in washrooms, cabins or corridors.
Configure how long each load stays ON after the last motion—shorter for lights if needed, and slightly longer for an exhaust fan or secondary circuit. This lets you tune IRIS S6DR to match real usage patterns in each space.
Find answers to common questions about IRIS S6DR
IRIS S6DR is a surface-mounted PIR (Passive Infrared) presence sensor with dual-load control, designed for automatic operation of two separate circuits—typically a light and an exhaust fan or two lighting groups. It detects human movement, turns loads ON when the area is occupied and switches them OFF after a preset delay, improving comfort, hygiene and energy efficiency.
IRIS S6DR is ideal for washrooms and toilets (for combined light + fan control), small offices and cabins, corridors and lift lobbies, and utility or service rooms where two loads need to follow occupancy automatically from a single sensor point.
IRIS S6DR is designed for typical indoor mounting heights and provides a suitable detection area for small to medium-sized rooms, washrooms and corridors. The effective range depends on mounting height, sensor orientation and sensitivity settings. For precise coverage details, refer to the IRIS S6DR technical data sheet.
IRIS S6DR can be used with most commonly installed lighting fixtures and small fans when wired according to the connection diagram and within the sensor’s rated output for each load. Always confirm compatibility and load ratings with the luminaire/fan manufacturer or a qualified electrician.
Yes. IRIS S6DR offers adjustable parameters such as detection sensitivity, hold time (delay) and daylight (lux) threshold, as well as configuration options for how each of the two loads should behave. This allows you to fine-tune operation for different room types and usage patterns.
IRIS S6DR is a surface-mount sensor, installed directly on ceilings or suitable flat surfaces in the target area. Once mounted and wired according to the instructions, it provides PIR coverage over the zone. Installation height, orientation and wiring details are given in the product’s technical and installation documentation.
© Sensinova India 2025. All rights reserved.
