Parking Areas
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
Nano Pro F is a high-performance flush mount motion sensor designed for precision lighting control using 5.8 GHz microwave technology. Engineered for spaces where accurate occupancy detection matters, it can sense even the slightest presence or movement. With advanced anti-interference capability, adjustable daylight threshold, and flexible time-delay settings, Nano Pro F helps optimize energy use while maintaining user comfort. Its broad detection coverage makes it ideal for offices, corridors, libraries, and commercial interiors. Smart, discreet, and efficient, Nano Pro F ensures lights operate only when needed, promoting sustainability and convenience.
120V-277V AC 50/60Hz
<1W（220V）
ON/OFF
Inductive, Resistive, LED Load
Resistive:1000W Inductive:800w LED Load：400w
5.8 GHz ±75 MHz，ISM band.
5mW Max.
5S~30Min
100%/75%/50%/25%
5lux~150lux/Disable Remote
Movement：3-4m Slight motion：3-4m Breathing：2-3m
2.5-4m
360°
0℃…+50℃
-40℃…+80℃
IP20
Ceiling mounted
5 years warranty
Nano Pro F is a high-performance flush mount motion sensor designed for precision lighting control using 5.8 GHz microwave technology. Engineered for spaces where accurate occupancy detection matters, it can sense even the slightest presence or movement. With advanced anti-interference capability, adjustable daylight threshold, and flexible time-delay settings, Nano Pro F helps optimize energy use while maintaining user comfort. Its broad detection coverage makes it ideal for offices, corridors, libraries, and commercial interiors. Smart, discreet, and efficient, Nano Pro F ensures lights operate only when needed, promoting sustainability and convenience.
Operating Voltage |
120V-277V AC 50/60Hz |
Working Mode |
ON/OFF |
Load Capacity |
Resistive:1000W Inductive:800w LED Load：400w |
Transmitting power |
5mW Max |
Detection: |
100%/75%/50%/25% |
Detection range (Radius) |
Movement：3-4m Slight motion：3-4m Breathing：2-3m |
Stand-by Power |
<1W（220V） |
Type of Load |
Inductive, Resistive, LED Load |
Operating frequency: |
5.8 GHz ±75 MHz，ISM band |
Hold time |
5S~30Min |
Daylight Sensor |
5lux~150lux/Disable Remote |
Mounting height |
2.5-4m |
Operating Temperature |
0℃…+50℃ |
Adjust the sensor's detection range from 2m to 16m by turning the reach knob. Turn it fully left for minimum range and fully right for maximum. Set based on location needs.
Choose how long the light stays ON (10 seconds to 12 minutes). Movement restarts the timer. Use the shortest time during setup and walk test for accurate adjustment.
Set light sensitivity from 2 to 2000 lux. Fully left = night-only mode (2 lux), fully right = day mode. Turn fully right during testing in daylight, then adjust per requirement.
Nano Pro-F is a compact, flush-mounted true presence sensor that goes beyond basic motion detection. Using high-frequency microwave technology, it can detect even slight movement and breathing-level presence within its 360° field. As long as people are truly in the zone, lights stay ON—and once the area is vacant, they switch OFF after the set delay. With 10–240V AC operation, IP54 protection and focused 3 m presence coverage, Nano Pro-F delivers precise, energy-efficient control in small indoor spaces.
Discover the simple yet effective way NANO 16 transforms your space
Emits 5.8GHz microwaves with <0.2mW power, ensuring precise detection.
Detects movement (0.6–1.5m/s) within 360° range, adjustable 2–16m.
Activates lights (≤800W incandescent / 300W LED) with 10s–12min delay.
A microwave motion sensor works by emitting high-frequency waves and detecting changes in the reflected signal. When motion occurs within the microwave sensor range, the reflection shifts, triggering a response. Unlike passive sensors, microwave sensors actively scan their surroundings, making them ideal for detecting subtle movement, even through walls or glass.
Advanced technology meets practical design for superior motion detection
Advanced 5.8 GHz technology for reliable motion detection through walls and doors
Comprehensive coverage for peace of mind
Smart power management reduces consumption
Designed for indoor environments
Adjustable light sensitivity
Delay Time
Detection Range
Install Height
Discover how Nano Pro-F True Presence Sensor keeps lights ON only when people are genuinely present in compact, high-value spaces.
Ensure uninterrupted lighting in cabins and small workspaces where people often sit still for long periods. Nano Pro-F detects even minor movement and breathing-level presence, keeping lights ON throughout focused work and turning them OFF automatically when the cabin is empty.
Ideal for washrooms, toilets and powder rooms where users may stand still at the mirror or inside cubicles. Nano Pro-F continues to sense subtle presence within its 3 m radius, preventing sudden darkness and switching lights OFF only after the space is truly vacant.
Perfect for small clinics, consultation rooms, treatment cabins and waiting nooks. The flush-mounted design blends into ceilings while true presence detection ensures continuous lighting during sessions and automatic OFF after the configured hold time once everyone leaves.
Use Nano Pro-F at corridor nodes, side niches or compact utility spaces where people pause briefly or work close to the sensor. It maintains illumination while presence is detected within its focused zone and reduces wasted burning hours once the area is empty.
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
Experience breathing-level true presence sensing with Nano Pro-F’s focused detection zone and adjustable lux and timing controls.
Experience breathing-level true presence sensing with Nano Pro-F’s focused detection zone and adjustable lux and timing controls.
When the space is already bright enough, Nano Pro-F keeps the lights OFF even if presence is detected, helping to avoid unnecessary power use.
When the ambient light drops below the chosen lux level and the sensor detects motion or breathing-level presence in its 3 m radius, the lights switch ON automatically to full brightness.
Once presence is no longer detected, the lights remain ON for the selected hold time (from about 10 seconds up to 12 minutes) and then turn OFF until the next detection.
In No Daylight mode, Nano Pro-F ignores ambient light and operates purely on true presence detection. This mode is ideal for enclosed washrooms, internal cabins, compact rooms or small corridor pockets where lights should always respond to occupancy, regardless of natural light.
As soon as a person enters the detection zone—whether walking, standing, or seated—the sensor turns the connected light ON.
While Nano Pro-F continues to sense movement, minor motion, or breathing-level presence within its focused range, the light stays ON continuously.
After the last detected presence and expiry of the configured hold time, the light switches OFF automatically, ready for the next occupancy cycle.
Nano Pro-F’s adjustable daylight (lux) threshold—from roughly 3 to 2000 lux—lets you decide when the sensor should react to presence. Use it to prevent lights from turning ON in bright spaces, or disable daylight influence when you want purely presence-based control.
Designed for a 3 m radius presence zone with motion detection out to about 3–4.5 m, Nano Pro-F lets you focus detection exactly where occupants sit, stand or use the space. This helps avoid unintended triggers from outside the target area.
Every new presence detection—right down to slight motion or breathing—resets the internal timer. Lights remain ON for the entire duration of use, preventing sudden switch-offs during meetings, consultations or quiet washroom use.
Choose how long lights stay ON after the last presence detection, from around 10 seconds up to approximately 12 minutes. Shorter times work well for quick-use areas; longer times suit cabins, small rooms and washrooms where people may take more time.
Find answers to common questions about Nano Pro-F
Nano Pro-F is a flush-mounted true presence sensor that uses microwave technology to detect not just motion, but also subtle movement and breathing-level presence within a compact 360° zone. It automatically switches lights ON when people are present and turns them OFF after a preset delay once the space is vacant, improving comfort and energy efficiency.
Nano Pro-F provides 360° coverage when ceiling-mounted at about 2–4 m height. It detects breathing-level presence within roughly a 3 m radius around the sensor and human motion up to around 3–4.5 m from the device, making it ideal for small rooms, cabins and washrooms.
Nano Pro-F operates on 10–240V AC, 50/60 Hz and is typically rated for up to about 1200 W of incandescent load or around 300 W of LED load when wired as per the technical data sheet. Always check the exact rating on the product label and confirm suitability with your electrician or luminaire supplier.
Nano Pro-F is designed for flush/ceiling mounting. The sensor body is inserted into an appropriate cut-out or mounting box, held in place with spring clips, and then wired according to the connection diagram. Correct mounting height, firm fixing and a clear view of the target area are important for reliable true presence detection.
Yes. Nano Pro-F includes adjustable time delay (approximately 10 seconds to 12 minutes) and daylight (lux) threshold (about 3–2000 lux). These settings allow installers to tune how quickly lights switch OFF and under what ambient light conditions they should turn ON, based on the application.
Nano Pro-F is ideal for compact indoor spaces where accurate presence sensing is critical—such as private cabins, small offices, toilets and washrooms, clinic rooms, consultation cabins, small waiting areas and corridor niches. It ensures lights stay ON when people are genuinely present and OFF when the space is empty.
© Sensinova India 2025. All rights reserved.
