Parking Areas
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
The NEO E15 DD Wardrobe Sensor offers innovative convenience and energy efficiency for wardrobe and cabinet lighting. With two modes – Door Sense and Wave Switch – it activates lighting without phsical contact, detecting door movements or gestures. It is an ideal addition to modern homes, enhancing the functionality of wardrobes, kitchen cabinets, and other storage areas.
12V/24V DC
6A
144W @24V DC | 72W @12V DC
100 cm
Door sense mode | Wave switch mode
12-17cm* in Door sense mode |
4-6cm* in wave switch mode
The NEO E15 DD Wardrobe Sensor offers innovative convenience and energy efficiency for wardrobe and cabinet lighting. With two modes – Door Sense and Wave Switch – it activates lighting without phsical contact, detecting door movements or gestures. It is an ideal addition to modern homes, enhancing the functionality of wardrobes, kitchen cabinets, and other storage areas.
Input Power Supply |
12V/24V DC |
Maximum Switching Capacity |
144W @24V DC | 72W @12V DC |
Operating Modes |
Door sense mode | Wave switch mode |
Maximum Current Rating |
6A |
Sensor Cable Length |
100 cm |
Sensing Distance |
12-17cm* in Door sense mode |
4-6cm* in wave switch mode |
Adjust the sensor's detection range from 2m to 16m by turning the reach knob. Turn it fully left for minimum range and fully right for maximum. Set based on location needs.
Choose how long the light stays ON (10 seconds to 12 minutes). Movement restarts the timer. Use the shortest time during setup and walk test for accurate adjustment.
Set light sensitivity from 2 to 2000 lux. Fully left = night-only mode (2 lux), fully right = day mode. Turn fully right during testing in daylight, then adjust per requirement.
NEO E15-DD is a compact dual-door DC wardrobe sensor designed for larger, two-shutter wardrobes and cabinets. It intelligently tracks both doors so that the light turns ON when either shutter opens and switches OFF only when the doors are closed again. With gesture control and smooth dimming available, NEO E15-DD delivers a switch-free, premium lighting experience across wide wardrobes and multi-door storage units.
Discover the simple yet effective way NANO 16 transforms your space
Emits 5.8GHz microwaves with <0.2mW power, ensuring precise detection.
Detects movement (0.6–1.5m/s) within 360° range, adjustable 2–16m.
Activates lights (≤800W incandescent / 300W LED) with 10s–12min delay.
A microwave motion sensor works by emitting high-frequency waves and detecting changes in the reflected signal. When motion occurs within the microwave sensor range, the reflection shifts, triggering a response. Unlike passive sensors, microwave sensors actively scan their surroundings, making them ideal for detecting subtle movement, even through walls or glass.
Advanced technology meets practical design for superior motion detection
Advanced 5.8 GHz technology for reliable motion detection through walls and doors
Comprehensive coverage for peace of mind
Smart power management reduces consumption
Designed for indoor environments
Adjustable light sensitivity
Input Power Supply
Maximum Current Rating
Sensor cable length
Discover how NEO E15-DD brings smart, contactless lighting to dual-door wardrobes and multi-door cabinets.
NEO E15-DD is made for classic two-shutter wardrobes. It monitors both doors so that whenever either one opens, the wardrobe light turns ON instantly. Once both shutters are closed, the sensor switches the light OFF, ensuring no energy is wasted inside a closed wardrobe.
Perfect for long, continuous wardrobe runs where two doors share a common lighting zone. NEO E15-DD ensures consistent lighting across the full span, reacting to whichever door is opened and keeping interiors clearly visible for the entire duration of use.
Use NEO E15-DD in tall kitchen, linen or pantry cabinets that have two doors or split fronts. The sensor brings the internal light ON as soon as either shutter opens and turns it OFF when both are shut, supporting clean interiors and efficient usage.
Ideal for crockery units, bar cabinets and glass-front storage with double doors. NEO E15-DD hides inside the furniture and automatically lights up the display when a door opens or when you use a gesture (depending on configuration), giving boutique-like presentation while controlling burning hours.
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
Enjoy intelligent dual-door sensing and gesture-based lighting with NEO E15-DD’s wardrobe-focused design.
In Dual-Door mode, NEO E15-DD monitors both wardrobe shutters. If either door opens, the sensor switches the light ON. The light remains ON as long as at least one door is open and switches OFF automatically once both shutters are closed. This ensures true, door-based logic for double-door wardrobes and cabinets.
When both shutters are fully closed, NEO E15-DD keeps the light OFF, preventing unnecessary energy use inside the wardrobe or cabinet.
The moment one of the doors opens, the sensor turns the light ON, making the entire interior visible regardless of which side you access.
After you finish and close all doors, NEO E15-DD switches the light OFF automatically and resets the system for the next use.
In gesture mode, NEO E15-DD allows you to control wardrobe lighting with simple hand movements near the sensor (as per wiring/driver configuration). A short wave can toggle the light ON/OFF, while holding your hand near the sensor can adjust brightness—ideal for premium wardrobes, vanities and display cabinets where you want soft, controlled light.
A quick hand wave in front of the sensor turns the light ON; repeat the gesture to turn it OFF—no mechanical switch required.
Keep your hand near the sensor to smoothly dim or brighten the light and stop at the level that suits your mood or application.
Once adjusted, the system typically recalls the last set brightness so the wardrobe lights return to the same level at the next activation.
NEO E15-DD is optimised for wardrobes and cabinets with two shutters or split fronts. It handles dual-door logic internally, so you don’t need separate switches or extra sensing hardware.
Door-based sensing and optional gesture control eliminate the need for physical switches. Users interact naturally—just open, close or wave—to control the light.
Smart motion detection resets the timer with new movement, ensuring lights stay on while the area is in use.
Built for DC wardrobe and cabinet lighting, NEO E15-DD ensures lights operate only when the doors are open or the user has intentionally switched them ON, significantly reducing wasted burning hours.
Find answers to common questions about NEO E15-DD
NEO E15-DD is a dual-door DC wardrobe sensor designed for two-shutter wardrobes, cabinets and display units. It automatically controls LED lighting based on door position and gestures, turning lights ON when either door opens and switching them OFF when both are closed.
While NEO E15 is typically used for single-door or standard wardrobe/cabinet applications, NEO E15-DD is tuned for dual-door logic. It is intended for double-door wardrobes or cabinets where either shutter can access the same lighting zone and the sensor must track both doors.
NEO E15-DD is designed for low-voltage DC wardrobe and cabinet lighting—such as LED strips and LED profiles—when used with suitable drivers as per its technical data sheet. Always confirm driver and load compatibility with your electrician or lighting supplier.
Yes. Depending on wiring and driver compatibility, NEO E15-DD can support gesture-based ON/OFF control and brightness adjustment. A quick wave can toggle the light, and holding your hand near the sensor can dim or brighten it, offering a very premium user experience.
NEO E15-DD is ideal for double-door wardrobes and closets, wide hinged wardrobe runs, tall kitchen or linen cabinets with two shutters, dual-door crockery or bar units, and similar premium furniture where centralised dual-door lighting control is needed.
No. NEO E15-DD is designed only for convenience and energy-efficient lighting control inside furniture. It is not intended to function as a safety, alarm or security sensor and should not be used for such purposes.
© Sensinova India 2025. All rights reserved.
