Parking Areas
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
The Nano HB20 Microwave Motion Sensor provides advanced, energy-efficient lighting control, featuring 360° detection and a customizable range of 4 to 15 meters. With adjustable sensitivity, time delay, and Lux settings, it is perfect for outdoor and industrial spaces, such as warehouses, parking lots, and building exteriors. The Nano HB20 operates reliably under various light conditions, distinguishing between day and night to activate lights only when needed. Its IP65 rating ensures durability against dust and water, making it ideal for harsh environments. Experience smarter, automated lighting with the Nano HB20 for enhanced safety, convenience, and energy savings.
120-277 V/AC
50/60Hz
360°
50%, 100%(choice)
2lux, 10lux, 50lux, 2000lux (choice)
<0.2mW
4-10m (radius), adjustable
5.8GHz CW radar, ISM band
approx 0.9W
4-15m
5s, 30s, 90s, 3min, Smin,10min, 20min,30min (choice)
10s, 1min, 5min, 10min, 30min, 60min, +00, Os
(choice Max.1200W (220-277V/AC), 800W (120V/AC), 800W (220-277V/AC), 400W (120V/AC)
The Nano HB20 Microwave Motion Sensor provides advanced, energy-efficient lighting control, featuring 360° detection and a customizable range of 4 to 15 meters. With adjustable sensitivity, time delay, and Lux settings, it is perfect for outdoor and industrial spaces, such as warehouses, parking lots, and building exteriors. The Nano HB20 operates reliably under various light conditions, distinguishing between day and night to activate lights only when needed. Its IP65 rating ensures durability against dust and water, making it ideal for harsh environments. Experience smarter, automated lighting with the Nano HB20 for enhanced safety, convenience, and energy savings.
Power Source |
120-277V/AC |
HF System |
5.8Ghz CW Radar, ISM Band |
Time Delay |
Min. 10Sec, Max. 12Min |
Detection Range |
50%, 100%(choice) |
Stand-by Period |
10s, Imin, Smin, 10min, 30min, 60min, |
Detection Motion Speed |
0.6-1.5m/s |
Detection Angle |
360° |
Power Frequency |
50/60Hz |
Transmission Power |
<0.2mW |
Rated Load |
800W (Incandescent), 400W (LED Load) |
Install Height |
4-15m |
Power Consumption |
Approx. 0.9W |
Detection Distance |
4-10m (radius), Adjustable |
Reach is the term used to describe the diameter of the more or less circular detection zone produced on the ground after mounting the sensor at a height of 2.5 to 6m. Turn the reach control fully anti-clockwise to select minimum reach(approx. 2m dia), and fully clockwise to select maximum reach(approx. 1óm dia). Adjust according to locations and site requirements.
The light can be set to stay ON for any period of time between approx. IOsec(turn fully anticlockwise) and a maximum of 12min(turn fully clockwise). Any movement detected before this time elapse will re-start the timer. It is recommended to select the shortest time for adjusting the detection zone and for performing the walk test.
The chosen light response threshold can be adjusted from approx. 2-2000 Lux. Turn it fully anti-clockwise to select dusk-to-dawn operation at about 2 Lux. Turn it fully clockwise to select continuous daylight operation. The knob must be turned fully clockwise when adjusting the detection zone and performing the walk test in daylight, then adjust setting according to site requirement.
Join thousands of satisfied customers who have already upgraded to NANO HB20. Get started with a free consultation or order your units today.
Discover the simple yet effective way NANO 16 transforms your space
Emits 5.8GHz microwaves with <0.2mW power, ensuring precise detection.
Detects movement (0.6–1.5m/s) within 360° range, adjustable 2–16m.
Activates lights (≤800W incandescent / 300W LED) with 10s–12min delay.
A microwave motion sensor works by emitting high-frequency waves and detecting changes in the reflected signal. When motion occurs within the microwave sensor range, the reflection shifts, triggering a response. Unlike passive sensors, microwave sensors actively scan their surroundings, making them ideal for detecting subtle movement, even through walls or glass.
Advanced technology meets practical design for superior motion detection
Advanced 5.8 GHz technology for reliable motion detection through walls and doors
Comprehensive coverage for peace of mind
Smart power management reduces consumption
Designed for indoor environments
Adjustable light sensitivity
Delay Time
Detection Range
Install Height
Discover how the NANO HB20 Microwave Motion Sensor transforms lighting control across diverse environments with superior detection and energy efficiency
Maintain bright, safe aisles only while people or forklifts are present. Nano HB20 detects movement under high-mounted fixtures, keeps lights at full output during activity and drops them to dim or OFF when the area is empty, reducing run-time across large storage zones.
Designed for high mounting heights, Nano HB20 provides wide 360° coverage over production lines and open factory floors. It reacts quickly to worker and vehicle movement, helping maintain safe visibility while limiting unnecessary burning hours during breaks or idle periods.
Perfect for open parking areas, loading yards and site perimeters where lights must withstand rain and dust. The sensor brings luminaires up to 100% when vehicles or people arrive, then moves them to dimmed stand-by or OFF once motion stops, saving energy in low-traffic hours
Boost safety and comfort around loading docks, entrances and building facades. Nano HB20’s microwave sensing works reliably even in harsh weather, ensuring lights respond whenever trucks, staff or visitors approach high-bay doors and exterior work zones.
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
Experience precise, energy-saving control with Nano HB20’s daylight sensing, 3-level dimming and advanced timing options
In Daylight mode, Nano HB20 only brings lights to full or dimmed output when two conditions are met: motion is detected and the ambient light level is below the set lux threshold. This prevents high-bay fixtures from running unnecessarily during bright daytime conditions in open warehouses, canopies or yards.
When natural light is above the selected lux level, the sensor keeps the lights OFF or in stand-by dim mode even if motion is detected, reducing daytime consumption.
When the ambient light drops below the set threshold and Nano HB20 detects movement, the connected lights switch to 100% brightness automatically for safe operation.
Once motion stops, the lights remain ON for the selected hold time and then step down to dimmed stand-by or turn OFF completely, depending on your configuration
In No Daylight mode, Nano HB20 ignores ambient lux and responds purely to motion. This is ideal for enclosed or always-dim areas such as covered loading bays, indoor factories, and night-time yards where lights must switch on whenever movement occurs, regardless of existing light levels
As soon as a person, forklift or vehicle enters the detection zone, the sensor drives the lights to full output for maximum visibility.
While motion continues within the coverage area, the lights stay ON or at your chosen bright level, ensuring a safe environment for ongoing work.
After the last detection and once the configured hold time and stand-by period expire, the lights return to dimmed stand-by or turn OFF, cutting energy use during idle times.
Automatically adjusts between day and night modes based on ambient light levels, ensuring optimal performance in any lighting condition.
Fine-tune sensitivity from 2m to 16m to perfectly match your space requirements and prevent false triggers.
Smart motion detection resets the timer with new movement, ensuring lights stay on while the area is in use.
Customize the delay from 10 seconds to 12 minutes after the last detected motion to suit your specific needs.
Find answers to common questions about Nano HB20
Nano HB20 is a high-bay microwave motion sensor designed for automatic control of industrial and outdoor lighting. It uses 5.8 GHz radar technology to detect movement with 360° coverage and switches lights between full, dimmed and OFF states based on occupancy and configured timings.
Nano HB20 provides an adjustable detection area, typically up to about 4–10 metres radius depending on mounting height and sensitivity settings, with installation heights up to around 15 metres. Actual performance will vary by site conditions, so always refer to the Nano HB20 technical data sheet and perform a walk test on site.
Nano HB20 can be used with most high-bay and outdoor luminaires within its rated load, when wired as per the connection diagram—such as LED high-bay fixtures, floodlights and other compatible loads. Always verify load ratings and compatibility with the luminaire supplier or your electrician before installation.
Nano HB20 is primarily designed for ceiling or high-bay mounting on poles, brackets or luminaires, where it can look down over the target area. In some projects it may also be installed on suitable walls or structures, provided the detection pattern and IP65 sealing are maintained according to the installation guide.
Yes. Nano HB20 offers multiple adjustable parameters including detection area (sensitivity), motion hold time, stand-by period, stand-by dim level and daylight (lux) threshold. These allow you to fine-tune how the sensor behaves for each high-bay or outdoor zone.
Nano HB20 is ideal for high-mount applications such as warehouses, industrial sheds, logistics hubs, outdoor parking lots, loading bays, canopies and other large spaces that need reliable, energy-efficient lighting control in tough environments
© Sensinova India 2025. All rights reserved.
