Parking Areas
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
The Sensinova SINO PRO True Presence Sensor is an intelligent 24GHz radar-based presence sensor that detects both movement and stationary occupants by sensing subtle breathing patterns across 360° range. Unlike conventional motion sensors, it keeps lights on while a person remains seated or working, improving comfort and energy efficiency. Featuring an adjustable 2–8 metre sensing range, IP44 protection, and customizable LUX, sensitivity, and timer settings, it is ideal for residential, commercial, and office lighting automation.
Voltage |
110–240V AC |
Frequency |
50/60 Hz |
HF System |
24 GHz CW Radar (ISM Band) |
Maximum Load (Resistive) |
2000W (220–240V) |
Maximum Load (LED) |
1000W (220–240V) |
IP Rating |
IP44 |
Detection Angle |
360° |
Detection Distance |
2–8 m (Adjustable) |
Ambient Light Level |
<3–2000 LUX (Adjustable) |
Installation Height |
2–4 m (Recommended: 3 m) |
Transmit Power |
<10 mW |
Time Delay |
10 seconds – 12 minutes (Adjustable) |
Adjust the sensor’s detection coverage from 2 m to 8 m diameter using the SENS control. Turn it towards “–” for a smaller, focused detection area and towards “+” for maximum room coverage. Set the sensitivity according to the room size and reduce it if nearby glass, metallic surfaces, curtains, airflow, or movement outside the intended area causes unwanted activation.
Adjust how long the connected light remains ON after the last detected presence or movement, from 10 seconds to 12 minutes. Each new detection restarts the timer. Use the minimum 10-second setting during testing, then select the required switch-off delay for the application.
Adjust the ambient-light threshold from 3 to 2000 lux. Set the control to SUN for day-and-night operation and for testing during daylight. Turn it towards 3 lux when the sensor should activate only in dark or low-light conditions.
SINO PRO is a ceiling-mounted 24 GHz true presence sensor designed for intelligent lighting control in occupied spaces. Unlike ordinary motion sensors, it detects breathing and stays on while you're still, automatically switching lights OFF only when the space is truly vacated.
Discover the simple yet effective way NANO 16 transforms your space
Emits 5.8GHz microwaves with <0.2mW power, ensuring precise detection.
Detects movement (0.6–1.5m/s) within 360° range, adjustable 2–16m.
Activates lights (≤800W incandescent / 300W LED) with 10s–12min delay.
A microwave motion sensor works by emitting high-frequency waves and detecting changes in the reflected signal. When motion occurs within the microwave sensor range, the reflection shifts, triggering a response. Unlike passive sensors, microwave sensors actively scan their surroundings, making them ideal for detecting subtle movement, even through walls or glass.
Advanced technology meets practical design for superior motion detection
Advanced 24 GHz technology for reliable motion detection through walls and doors
Comprehensive coverage for peace of mind
Smart power management reduces consumption
Designed for indoor environments
Yes, adjustable <3–2000 LUX
Delay Time
Detection Range
Install Height
Discover how the SINO PRO True Presence Sensor transforms lighting control across homes, offices, and industrial spaces with true presence detection and energy efficiency.
Warehouses, loading bays. IP44 rated for dusty, lightly damp
environments.
Living rooms, bedrooms, offices, corridors — ensures lights stay on while occupied
Offices, meeting rooms, retail areas. Automate lighting for energy
savings.
Reliable emergency lighting for underground and multi-level parking facilities, ensuring safety in low-light conditions.
Experience intuitive control with Nano W12's advanced features designed for modern living
In Daylight mode, Nano W12 only turns lights ON when both conditions are met: motion is detected and the ambient light level is below the set lux threshold. This prevents lights from switching on unnecessarily in naturally bright spaces such as corridors with windows or staircases with skylights
When there is enough natural light, the sensor keeps the light OFF even if motion is detected.
When the ambient light falls below the set level and the sensor detects movement, the light switches ON automatically.
Once motion stops, the light remains ON for the selected hold time and then switches OFF automatically.
In No Daylight mode, Nano W12 ignores the ambient light level and responds purely to motion. This mode is ideal for consistently dim or enclosed areas such as internal corridors, basement approaches, and underpasses where lights must always come on whenever movement is detected.
As soon as a person enters the detection zone, the sensor switches the light ON to full brightness.
As long as motion continues, the light stays ON, ensuring a safe and comfortable environment.
After the last detection and expiry of the configured hold time, the light turns OFF automatically
Nano W12 can differentiate between day and night using its built-in light sensing. It automatically adjusts operation based on ambient lux levels, ensuring lights are used only when they’re actually needed
Set the detection range to suit the space. Nano W12 allows fine adjustment of sensitivity so that motion is detected only within the desired area, helping avoid false triggers from adjacent zones.
Smart re-triggering means the timer resets whenever new motion is detected. Lights remain ON continuously while people are present, providing uninterrupted illumination during peak activity
Choose how long the lights stay ON after the last detection. The adjustable hold time lets you match sensor behaviour to the application, from quick shut-off for short passages to longer delays for high-traffic areas.
Find answers to common questions about Sino Pro True Presence Sensor
Unlike PIR (passive infrared) motion sensors that only detect movement, SINO PRO uses 24 GHz microwave radar to detect true presence, including tiny chest movements from breathing. This means the lights stay on even when you’re sitting still at a desk or standing in one spot, not just when you’re moving around.
For optimal coverage, mount it centrally on the ceiling at a height of 2–4m (3m is ideal), facing open areas rather than walls. Avoid installing near mirrors, glass, metallic surfaces, HVAC vents, radiators, or open windows, as these can interfere with detection or cause false triggers.
SINO PRO has an IP44 rating, which means it’s suitable for covered or sheltered outdoor locations like porches and garages, but it’s not designed for direct rain exposure.
This is normal. After power-up, SINO PRO enters a 30-second calibration mode during which it won’t trigger. Once calibration is complete, it will begin detecting presence as expected.
If lights won’t turn off, check for continuous signals in the detection range and confirm the TIME delay isn’t set to maximum. For sensitivity issues, check ambient temperature, the position of nearby signal sources, and installation height — these can all affect detection accuracy.
© Sensinova India 2026. All rights reserved.
